1.Introduction :
This machine applicable to ISO14556:2000《Steel-charpy V-notch pendnlum impact Test-Instvumented test method》;GB/T19748-2005《Metal charpy v-notch Pendulum Impact Test instrumentation test method》;GB/T3808-2002《Pendulum Impact Testing Machine test》. By Testing the impact value, data collection and analysis of the impact process, energy change curve drawing, material fracture at different stages clear physics meaning and explanation, to study, analyze the material fracture behavior of the process, to provide accurate data in detail.
Technical Parameters
|
Model |
JBW-150H |
JBW-300H |
JBW-450H |
JBW-600H |
JBW-750H |
|
Control Way |
Computer Control |
||||
|
Max. Impact Energy |
150J |
300J |
450J |
600J |
750J |
|
Impact Speed |
5.24m/s |
||||
|
Pendulum pre-raising Angle |
150 |
||||
|
Angle Accuracy |
±0.1° |
||||
|
Specimen Bearer Span |
40mm |
||||
|
Round angle of the jaw |
R1.0～1.5mm |
||||
|
Round angle of impact edge |
R2.0～2.5mm(R8mm) |
||||
|
Impact blade Angle |
30° |
||||
|
Impact blade thickness |
16mm |
||||
|
Distance between the Pendulum center and impact point |
750mm |
||||
|
Standard Specimen Size |
10×10(7.5or5)×55mm |
||||
|
Load Sensor Accuracy |
≤±1﹪FS |
||||
|
Angle Sensor Accuracy |
0.1° |
||||
|
Pendulum configuration |
150J |
300J |
450J |
600J |
750J |
|
Power Supply |
Three-phase four-wire system 50Hz /380V |
||||
Send an inquiry for this product
