Application:
The MFD800C is an advanced digital ultrasonic flaw detector featuring a multi-color TFT LCD and a host
of new features to meet challenging inspection requirements. It combines powerful flaw detection and
measurement capabilities, extensive data storage, and the ability to transfer detailed inspection data to
the PC via its high-speed USB port.
The instrument incorporates many advanced signal processing features including a 15MHz RF bandwidth
to permit testing of thin materials, narrowband filters to improve signal to noise in high gain applications,
a spike pulser for applications requiring higher frequencies, and a tunable square wave pulser to optimize
penetration on thick or highly attenuating materials.
The instrument can be widely used in locating and sizing hidden cracks, voids, disbands, and similar
discontinuities in welds, forgings, billets, axles, shafts, tanks and pressure vessels, turbines, and structural
components.
FEATURES
The instrument extends the performance and range of applications that are capable of being satisfied by a
portable instrument. The quality, portability, durability, and dependability that you have come to expect from
the popular Mitech MFD Series of instruments remain.
DISPLAY
Hi-resolution (640× 480 pixels) multi-color TFT LCD with 4 user-selectable brightness control provides high
contrast viewing of the waveform from bright, direct sunlight to complete darkness.
The hi-resolution multi-color TFT LCD display with fast 60 Hz update gives an "analog look" to the waveform
providing detailed information that is critical in many applications including nuclear power plant inspections.
RANGE
Up to 9999 mm in steel; Range selectable in fixed steps or continuously variable. Suitable for use on large work
pieces and in high-resolution measurements.
PULSER
Pulse Energy selectable among 200V, 300V, 400V, 500V and 600V...
Pulse Width tunable from 0.1µ S to 0.5 µ S to match the probes with different frequency.
Pulse Repetition Frequency adjustable from 10 Hz to 1 kHz in 1 Hz increments.
Damping selectable among 68Ω\100Ω\150Ω and 500Ω for optimum probe performance
Test Modes include Pulse echo, dual and thru-transmission
RECEIVER
Sampling: 10 digit AD Converter at the sampling speed of 160 MHz
Rectification: Positive Halfwave, Negative Halfwave, Fullwave and RF
Analog Bandwidth: 0.5MHz to 15MHz capability with selectable frequency ranges (automatically set by the
instrument) to match probe for optimum performance.
Gain: 0 dB to 110 dB adjustable in selectable steps 0.1 dB, 2 dB, 6 dB, and locked.
GATES
Two fully independent gates offer a range of measurement options for signal height or distance using peak triggering.
The echo-to-echo mode allows accurate gate positioning for signals which are extremely close together.
Gate Start: Variable over entire displayed range
Gate Width: Variable from Gate Start to end of displayed range
Gate Height: Variable from 0 to 99% Full Screen Height
Alarms: Threshold positive/negative
|
No. |
Item |
Quantity |
|
1 |
Main Body |
1 |
|
2 |
Straight Beam Probe |
1 |
|
3 |
Angle Probe |
1 |
|
4 |
Machine-probe Cable (Q9-Q9) |
1 |
|
5 |
BatteryModule |
1 |
|
6 |
Power Adapter (Charger) |
1 |
|
7 |
Support Pillar |
1 |
|
8 |
Manual |
1 |
|
9 |
Instrument Case |
1 |
|
10 |
Datapro Software |
1 |
|
11 |
USB communication Cable
Model: MUSB01 |
Send an inquiry for this product