INTRODUCTION
A stroboscope, also known as a strobe, Work according to the stroboscopic principle. It makes
motion sequences visible which
otherwise cannot be observed by the naked eye: by synchronizing the flash frequency to the
movement of the observed object and
emitting intensive light pulse of short duration, the object is always illuminated at the same point
of its movement, so that it appears to
the eye as if it were motionless. And it is an instrument used to make a cyclically moving object
appear to be slow-moving, or stationary.
It is suitable for non-contact RPM measurement, inspection and observation of moving parts.
HS-02C rectangular stroboscope is mainly applied to check the quality of the width printing.
And we advise to choose the external Trigger mode. This stroboscope is widely used on the
high-speed press, inspecting, bronzing, cutting and rolling machines.
APPLICATIONS
Moter，Packing，Printing，Textile industry.
SPECIFICATIONS
1. Sensor Power Supply：220±10% V AC, 2A, 50HZ
2. Flash Range：50～12000 RPM
3. External Trigger：DC5～12V pulse
MODEL SIZE IRRADIATION WIDTH REMARK
PN-02C/350 350X150X160mm ≥500mm One lamp
PN-02C/600 600X110X160mm ≥800mm Two lamps
PN-02C/800 800X110X160mm ≥1000mm Three lamps
PN-02C/1000 1000X110x160mm ≥1200mm Three lamps
PN-02C/1250 1250X110X160mm ≥1500mm Four lamps
CONNECTIONS
Electrical: none required
Send an inquiry for this product